How to String a Classical Guitar DIY Video

Tips and tools needed to change the strings of a classical guitar.

Changing strings on a nylon string instrument is very different from struggling with knobs and wire on a steel string acoustic. PGNikos Arvantis of offers an in-depth tutorial on changing nylon strings, and more specifically on a classical instrument, where the number of string holes on the binding block (six, nine, or 12) varies from model to model. ‘other. His tools: a set of normal-tension D’Addario strings, a string winder, wire cutters and a handstand. Nikos guides us one string at a time, from the bridge to the tuners. It begins by running the bass string through the bridge to the binding block – in this case a 6-hole variation – and displays proper string binding technique. Think in circles and stay patient. It can be difficult the first few times, especially for those with big fingers. Next, we move on to the doll. The lowest bass string should also be tied tightly, then wound up high so that the windings pass outside the string roller. For the next two low strings, the windings go inward. This avoids overlapping strings. Then it moves to the highest rope, where the light gauge can be particularly difficult to tie off, and also holds the rope outside the roller while winding up at a walk. The next two highest strings go on the inner part of the roll, as with the lower strings. Finally, the free ends that protrude from the knots on the tie block and the rollers are cut with the thread cutter. And rape! If your nylon string guitar has a nine or 12 hole block, check the manual or other sources.

From articles on your site

Related articles on the web

Comments are closed.